高能量离子束诊断质谱仪的研制及性能表征

本研究开发了一台应用于高能量离子束诊断的直线式飞行时间质谱仪，实现了其与高能真空弧放电离子源的联用。该仪器加速电压30 kV，飞行腔有效飞行距离1.5 m，通过短脉冲离子门精确截取，ICCD高速相机优化聚焦，仪器分辨率优于90 FWHM，对放电过程中产生的等离子体可实现不同时间的离子成分分析。将该方法用于真空弧放电离子源放电过程中离子成分的检测，放电2 μs时，电离成分以气态离子C⁺、O⁺、C²⁺、O²⁺为主；放电6 μs后，除气体成分外，还可以检测到Fe⁺、Cu⁺及其同位素金属离子峰。该仪器能够给出离子源放电产生离子的种类、价态以及相对含量等信息，可实现整个放电过程产生离子成分信息的准确诊断。     

Layered double hydroxide coatings on magnesium alloys: A review

Layered double hydroxides (LDHs) as a class of anionic clays have extensive applications due to their unique structures. Nowadays, the emphasis is laid on the development of LDH coatings for corrosion resistance and medical applications. Thus, this review highlights synthetic methods of LDH coatings and LDH-based composite coatings on magnesium alloys. Special attention is focused on self-healing, biocompatible and self-cleaning LDH-based composite coatings on magnesium alloys.     

自保护药芯焊丝明弧堆焊Fe-Cr-C-B-W合金的组织及性能

采用自保护药芯焊丝明弧堆焊技术制备五组不同钨含量的Fe-Cr-C-B-W合金. 借助金相显微镜、扫描电子显微镜、X射线衍射仪、洛氏硬度计和磨损试验机分析堆焊合金的组织及性能. 结果表明，合金的显微组织由马氏体、残余奥氏体、M₇(C,B)₃，M₃(C,B)，Fe₃W₃C和WC组成. 大部分钨元素被迁移到晶界生成了比WC稳定性更好的Fe₃W₃C缺碳复合相，堆焊层中没有典型的初生WC硬质相颗粒生成. 随着钨添加量的增多，共晶硬质相M₇(C,B)₃，M₃(C,B)和Fe₃W₃C随之增多，间距减小，呈连续网状均匀分布. 当钨的添加量为12%时，堆焊层的耐磨性达到最佳.     

饱和尾粉砂动孔隙水压力发展特性试验研究

采用动三轴仪对内蒙古某尾矿库尾粉砂进行了动强度试验,研究了围压、相对密实度及固结比对动荷载作用下尾粉砂中孔隙水压力发展特性的影响。研究结果表明,随着固结比、相对密实度、围压的增大,动荷载作用下饱和尾粉砂孔压增长曲线形状由陡峭转变为平缓。随着围压及固结比增大,试样动力破坏形式从以孔压值为主要表征指标的液化破坏,转化为以动剪应变为主要破坏形式的软化破坏。动荷载作用下发生液化破坏的饱和尾粉砂孔压增长过程分可为初始增长阶段、稳定增长阶段和快速增长至破坏阶段,孔压增长曲线表现为明显的反S型,本文采用双对数函数对该试验孔压增长曲线进行拟合,结果表明该模型可以较好地模拟尾粉砂在动荷载作用下的孔压发展规律。     

Improving basic relationships of pipe hydraulics

This communication presents the approaches set up for processing spinner flowmeter well logs in vertical wells with a single fluid phase, which is the most widely used in assessing wells productivity. These focus on improving the pipe hydraulics relationships so that the different fluid inputs throughout the well can be quantified. Since vertical flow inside wells varies with depth between laminar flows (very low Reynolds number, i.e. Re < 10³) and turbulent (Re > 4·10³) the aim has been to reduce the uncertainty in the transition interval. Starting from bibliographical data and/or well-known formulas for laminar and for turbulent flow, several continuous relationships have been developed for any regime: 1) an expression for the radial distribution of velocity inside the pipeline (velocity profile) was developed. 2) A relationship between the average velocity and the velocity at the axis (velocity factor) was created. 3) A third equation was generated to obtain the friction factor in smooth pipes (and starting from this, a new explicit equation for rough pipes). The purpose has been to have a set of empirical expressions of easy and continuous application for any regime, as an alternative to the use of computer simulations.     

Design of energy‐efficient train speed profiles considering fixed‐block signaling system

In dense traffic railway networks, trains may often slow down or stop between stations owing to previous train delays. If preceding train trajectory can be predicted, energy‐efficient driving can be achieved by suppressing unnecessary speed changes. In this paper, we propose an algorithm to find energy‐efficient driving considering fixed‐block signaling (FBS) system by using dynamic programming (DP). DP is suitable for use because it can optimize the control inputs with discrete and state constraints. In this paper, we discuss energy‐efficient driving by considering a FBS system using some case studies of simulation. In the simulation, we examine a technique to drive an express train in an energy‐efficient way when the preceding local train is running toward the station with passing loops. The results show that the proposed method can derive complex speed profiles for energy‐efficient driving and the train can be operated with a maximum reduced energy consumption of 8.3%.     

临涣选煤厂粗煤泥回收工艺优化的实践应用

临涣选煤厂针对洗选过程中存在的精煤泥旋流器组溢流跑粗、精煤泥弧形筛筛下水跑粗、精煤泥弧形筛脱水效果较差等问题，重点开展精煤泥分级旋流器组入料分配不均匀、筛分错配物影响、弧形筛脱水效果的现场攻关和研究。现场大量试验表明:通过停止精煤泥旋流器组，增加精煤泥弧形筛数量、减小筛缝尺寸，改变精煤泥弧形筛击打，改用高频脱水筛等方式，从源头上解决了精煤泥分级旋流器组跑粗，明显改善了精煤泥弧形筛筛下水跑粗的问题，提高了精煤泥弧形筛分选效果。在降低介泥灰分、减少浮选过程中粗颗粒的含量、缓解浮选回收压力、降低降低浮选油耗、提高浮选精煤灰分、保证精煤产率、节约生产成本方面有实践意义。     

One‐shot radical polymerization of vinyl monomers with different reactivity accompanying spontaneous delay of polymerization for the synthesis of double‐network hydrogels

Double‐network hydrogels were conveniently synthesized by the one‐shot radical polymerization of an ionic monomer for the first network and a non‐ionic monomer for the second network in the presence of crosslinkers by simultaneous addition of the monomers, that is, one‐shot and spontaneous two‐step polymerization accompanying the delay of polymerization of a second network monomer. We analyzed the polymerization process based on the conversion of each monomer during the reaction in the absence of crosslinkers. Then we fabricated the double‐network hydrogels using several polymerization systems consisting of a conjugated monomer and a non‐conjugated monomer in the presence of the dual crosslinkers. We analyzed the swelling, mechanical and viscoelastic properties of hydrogels synthesized by one‐shot radical polymerization to confirm the production mechanism and the network structure of the hydrogels. © 2020 Society of Chemical Industry